
該圖片為Repmarine公司的羅格里奧發給Straightpoint ,并說:
"We carry out load test at our facilities, in the past the load was calculated by pressure versus cylinder area. However when we call third party, to witness the test, we normally face a problem to evidence the cylinder area. So we decided to install a Straightpoint load cell. Now the issue is over as we can now read the load direct." 我們經常需要在公司自己的場地上進行負荷測試,過去對于加載負荷值的計算,我們是通過液壓面積所受壓力大小確定的。但是,當需要第三方機構對此測試進行現場認證時,我們總會遇到一些問題。因此,我們決定采用速得測力環設備來輔助試驗負荷測試,F(xiàn)在,這些問題都已迎刃而解,我們可以通過它直接讀取測試中實際加載的負荷值。
|